imported_dr.drew1987

i have a 92 civic lx with now a 1990 zc obd0 motor dohc and i changed the dizzy to work with the obd1 and i got the motor running but there is 2 plugs that are still unplugged off the harness and theyre near the starter does anyone have an idea or a diagram of the harness with plugs thatlll show me what everything plugs into etc.
thanks

Andrew

imported_chris_v2

any CEL's?

or pictures of the plugs

imported_dr.drew1987

yeah i can get pics of the two plugs, theyre round and grey inside too with the looks off 3 pins, i cant find a diagram online anywhere to help me. and no CEL so i dont know.

imported_dr.drew1987

i got two pics... one of each posted on my webpage.

www.egpower.piczo.com

please let me know what they are for, the one plug is connected with a ground that attached to the top of the starter, and the other plug is closely connected with the TPS so they should be obvious but i did so much wiring and didnt label everything i got mixed up. thanks

imported_kickz

the pic on the left looks like your fan switch
on the ZC the fan switch is located at the back of the block
make sure your fan comes on

imported_kickz

and the one on the right might be for the evap purge sol.. that you dont need

imported_dr.drew1987

so the left is the fan switch and the right i dont need on the zc? thanks for the help.

imported_janz3n

give me my motor back

imported_dr.drew1987

dude i told you to swap it into your beast.