zc distributor
10-May-2004, 08:46 PM
#1
Registered User
Thread Starter
Join Date: Mar 2003
Posts: 15
zc distributor
Just bought a distributor for my ZC and was wondering if anyone could tell me what indicates if a dizzy is in good condition or on its way out? For example, how much resistance should there be on the shaft when I spin it by hand...any input would be great and thanks in advance.
13-May-2004, 01:11 AM
#2
!!!!AWAITING CONFIRMATION!!!!!!
Join Date: Jun 2002
Location: not at the pump...
Posts: 933
the shaft should have some play regardless.
when you spin the rotor, you should be able to feel it kinda clicking into spots, like slots, but should move very easily, take off the cap, and make sure you dont see any "redhairs" tiny red wires they are the windings..
btw, its the ignitor that usually goes in them, well in my cases..
when you spin the rotor, you should be able to feel it kinda clicking into spots, like slots, but should move very easily, take off the cap, and make sure you dont see any "redhairs" tiny red wires they are the windings..
btw, its the ignitor that usually goes in them, well in my cases..
Thread
Thread Starter
Forum
Replies
Last Post
civicnation
Honda Civic Performance - JDM Discussion
6
13-Oct-2005 10:12 PM
