Type R sway bars on EG H/B
#1
Type R sway bars on EG H/B
Has anyone done this? What do I need to make this work....cause I know that the type R uses ball and socket type endlinks while my EG uses the sandwich type....do I need type R lower arms?
And what about the rear sway bar? what do I need for that? I know everyone talks about a "beaks" kit that strengthens the rear mounting points for the bar so that it doesnt rip apart the rear suspension....my question is where can you buy this?
any help is appreciated...
And what about the rear sway bar? what do I need for that? I know everyone talks about a "beaks" kit that strengthens the rear mounting points for the bar so that it doesnt rip apart the rear suspension....my question is where can you buy this?
any help is appreciated...
#3
Do a search on www.honda-tech.com .There is a ton of good info on that site.
#4
to use gs-r type r sway bars..u'll need the lower control arms from and integra i think 99-00 sir and delsol as well? correct if i am wrong....at least for gs-r sway bars lytpe r i think it should be the same...
#6
a beaks kit is all you need AFAIK......
lower control arms from a type R wouldn't hurt any .. but if you do that you'd also need type R rear shocks too.... GSR rar arms would be a good choice...
lower control arms from a type R wouldn't hurt any .. but if you do that you'd also need type R rear shocks too.... GSR rar arms would be a good choice...
#7
Its been covered many times. This is essentially what you need:
http://www.beaksproducts.com/srk-eg.html
http://www.beaksproducts.com/srk-eg.html
#10
Originally posted by Quick_CX
to use gs-r type r sway bars..u'll need the lower control arms from and integra i think 99-00 sir and delsol as well? correct if i am wrong....at least for gs-r sway bars lytpe r i think it should be the same...
to use gs-r type r sway bars..u'll need the lower control arms from and integra i think 99-00 sir and delsol as well? correct if i am wrong....at least for gs-r sway bars lytpe r i think it should be the same...
For the ITR bar in the rear, a sub-frame reinforcement kit such as the Beaks kit is highly recommended. I've found an alternate method just using OEM parts but I don't think it's capable of handling the abuse.
Quick_CX, just FYI, 99-00 SiR rear LCAs are not directly compatible with 5th gens... and they are also the same as the ones found on the other 6th gens. 6th gen rear LCAs have the mounting points for the endlinks in different locations than Del Sol, Integra and Civic EX-V, and they're there on all the models of 6th gens (meaning you don't have to swap ones in from an SiR to add a sway bar).
Thread
Thread Starter
Forum
Replies
Last Post
CivicX
Honda Civic Performance - JDM Discussion
7
22-Apr-2004 06:08 PM
civicsi1415
Honda Civic Performance - JDM Discussion
28
14-Aug-2003 04:11 AM