Type R in EG Question
19-May-2006, 05:17 PM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Whitby/Ajxa
Posts: 549
Type R in EG Question
Im putting a B18C5 into the Eg and i have the stock wiring harness from the EG and im also getting the harness that was used on the R in an CRX could i used that harness instead? Also does an OBD1 engine harness wire upto the Type R or would i used the guys harness from the CRX and than get a jumper from OBD2 to OBD1. How can you tell if its an OBD2 harness as well Plugs?? Need a lil help Thanks...
19-May-2006, 05:54 PM
#2
Registered User
Join Date: Jul 2005
Location: Scarborough
Posts: 1,061
there are many different ways to do this swap....it can be done with type R harness...or it can be done with stock harness.....
assuming this is not JDM ITR....if it is, not recommended to use the harness cus it's reversed
here are the follow ways to do this:
1. type R harness with type R ECU, in that case you have to get a OBD conversion harness...
2. type R harness with stock ECU, then chip it for vtec...keep obd1
3. stock harness with stock ECU, then chip it for vtec..keep obd1
as for how to tell difference between harness....i am not sure, but i think obd2 harness have more plugs than obd1 harness....sumone correct me if i'm wrong
assuming this is not JDM ITR....if it is, not recommended to use the harness cus it's reversed
here are the follow ways to do this:
1. type R harness with type R ECU, in that case you have to get a OBD conversion harness...
2. type R harness with stock ECU, then chip it for vtec...keep obd1
3. stock harness with stock ECU, then chip it for vtec..keep obd1
as for how to tell difference between harness....i am not sure, but i think obd2 harness have more plugs than obd1 harness....sumone correct me if i'm wrong
19-May-2006, 06:00 PM
#3
Registered User
Join Date: Mar 2006
Location: Hamilton
Posts: 146
the crx harnes is it a obd0 harnes?because the crx wher obd0?
use ur stock obd1 harnes and just add the wire's u need it be easier that why for yaaaa.... is the b18c5 motor obd2 or has it been converted to obd1?
use ur stock obd1 harnes and just add the wire's u need it be easier that why for yaaaa.... is the b18c5 motor obd2 or has it been converted to obd1?
19-May-2006, 06:37 PM
#4
Registered User
Thread Starter
Join Date: Nov 2003
Location: Whitby/Ajxa
Posts: 549
The B18C5 is an OBD2 complete. Um im pretty sure it also plugged into an P72 computer as well. I wanna do this swap the proper way not takin short cuts or half *** jobs. So i could run the type R harness and use his computer for this swap and things would be alrite...
19-May-2006, 07:11 PM
#5
Registered User
Join Date: Jul 2005
Location: Scarborough
Posts: 1,061
Originally posted by Scantron
The B18C5 is an OBD2 complete. Um im pretty sure it also plugged into an P72 computer as well. I wanna do this swap the proper way not takin short cuts or half *** jobs. So i could run the type R harness and use his computer for this swap and things would be alrite...
The B18C5 is an OBD2 complete. Um im pretty sure it also plugged into an P72 computer as well. I wanna do this swap the proper way not takin short cuts or half *** jobs. So i could run the type R harness and use his computer for this swap and things would be alrite...
23-May-2006, 05:26 PM
#10
Registered User
Join Date: Jul 2005
Location: Scarborough
Posts: 1,061
Originally posted by Scantron
But i could use the wiring harness that was hooked upto this ECU,but use a P28 or what should i run?
But i could use the wiring harness that was hooked upto this ECU,but use a P28 or what should i run?
Thread
Thread Starter
Forum
Replies
Last Post
itrT
Acura - Honda
2
29-Feb-2008 01:45 AM
imported_JDMman
Interior - Audio - Security
7
10-Mar-2006 03:13 PM
