Turner Lugs Question.. Help Quick
 

I NEED TO DECIDE IF I SHOULD GET THE M12X1.25 SIZE OR M12X1.5 FOR HONDA CIVIC.. WHAT BRAND DO YOU GUYS RECOMMEND.. NEED TURNER LUGS AND WHEEL LOCKS

M12x1.5 would be the correct size to get... brand depends on budget M12x1.25 is the WRX pattern which is a little finer.

Ask Si Veloz, he knows all about lug nuts and studs by now. :)

The best quality for a decent price would be McGard.

re
 

if i'm not mistaken the 1.25 and 1.5 refer to the thread of the bolt that the lock/lugnut will go onto. make sure u get the right one as u dont wanna be trying to force a lock/nut onto a bolt with a different thread.

and yea mcguard is one of the more well known names in this area.

You're right about the 1.25 vs 1.50 - it refers to the thread "pitch" one is finer than the other. bbarbulo nailed it with them being 12mm (diameter) x 1.50 for Honda's.

kyokugen or zenki..
mcgard is cool, but heavy compared to true tuners

lugs? ah...where to start :D
12x1.5x2.5
i'm getting Skunk2's
tho there are cheaper out there, but they're as back-ordered as anything and everything else..

how much length are you looking for ..the accords are about a 1/4" longer, never bothered checking out anything else tho..

just watch your knurl ..

thanx for the "training" bb.. :D