tranny problem
#1
tranny problem
i did a swap for someone on this board. he drove the car for 2 dys and tranny got fu.cked up( got suck in 3rd gear and wouldn't come out). rebluit it and put back together and drove fine and like tens minutes later it wouldn't stay in 4th gear ( pops out under load)...tuck it out again to see whats wronge and everthing looked good but to be on the safe side i replaced 4th gear hub and sleeve.....tranny drove good for 2 days and then started to pop out again!!!!!!!
#3
Sounds like a shift rail or fork problem. What materials are the forks made out of?
OR, whoever rebuilt the tranny didn't shim it properly.
I've rebuilt a few DSM trannys and the first one I screwed up and lasted 2 stop lights....ended up not being shimmed properly.
OR, whoever rebuilt the tranny didn't shim it properly.
I've rebuilt a few DSM trannys and the first one I screwed up and lasted 2 stop lights....ended up not being shimmed properly.
#4
i rebuild h22 and bseries tranny for race cars( i make them into dog boxs trannies)....i use AMSOIL full Synthetic oil......shifter fork can't be bent becuase it worked mint for 2days.....ive taken the tranny apart 3 times already and even had joe at altech to look at it and he said that there nothing wronge with it.......going to try changing the oil but its 1 week old.
#5
Did the trannys grind before they got stuck?
I'm not saying your building skills suck.
Maybe it's a hybrid tranny? Whoever you bought the motor from already built the tranny and didn't do it properly.
Have you tried to jack the car up and manually shift gears with someone in the car? Could be a linkage problem....
I'm not saying your building skills suck.
Maybe it's a hybrid tranny? Whoever you bought the motor from already built the tranny and didn't do it properly.
Have you tried to jack the car up and manually shift gears with someone in the car? Could be a linkage problem....
#6
tranny was mint, never opened before, had trouble with the avid shift linkages, they where to long had to cut them shorter... trany was mint when i completeed the swap but the shift linkages where to lond so ur hand was hitting the cup holders.
Thread
Thread Starter
Forum
Replies
Last Post
Sassafrass
Honda Civic Performance - JDM Discussion
8
28-Jul-2002 12:58 AM