Timing belt replacement question
#1
Timing belt replacement question
ive recently learned that there is a specific tool to use for this replacement concerning the crank pulley... where can one be accessed? and if not is there any other way to do it?
#2
yes.
An air gun works fine. (most of the time)
Or.. remove the starter and hold the flywheel steady with a pry bar.
The tool can be purchased at honda locally.. or ordered online from numerous places. It's called a crank pulley holder.
An air gun works fine. (most of the time)
Or.. remove the starter and hold the flywheel steady with a pry bar.
The tool can be purchased at honda locally.. or ordered online from numerous places. It's called a crank pulley holder.
#7
get it off the snap on guy or something. all the crank pully bolts have lock tight on it. if its the first time u pull it out besides the IR titanium gun all the other air gun wont do it. sometimes thier so tight i need to put like 2 feet pipe on my johnson bars to get it out.
good luck
good luck
#8
i got mine from princess auto for 15 bucks.... i used it twice so it paid its self off for me. there is a couple around ontario..they got lots of specialty tools cheap. if it last u mor ethan on euse for the price its worth it to me.
Thread
Thread Starter
Forum
Replies
Last Post
imported_bosco659
Honda Civic Performance - JDM Discussion
2
08-Sep-2007 09:36 PM
Bitious
Honda Civic Performance - JDM Discussion
6
11-Apr-2003 04:24 PM