Stock rotor sizes for EG's? Aaron!!!
#1
Stock rotor sizes for EG's? Aaron!!!
Aaron probably knows where I can find this info! If not is there NE1 that knows where I can find the stock rotor sizes? I would measure mine but I got rid of those a long time ago and upgraded to big brake rotors. I need to know this because I want to order Wilwood 4 piston calipers and the salesman needs to know what size my stock rears are. They are either 240mm or 262mm. Forgot to add that it's a 93 SI
Thanks in advance!
Thanks in advance!
#2
I believe this is what you are looking for assuming that this sites specs are correct and the conversion is right.
link to specs
It would make sense that you have the 240mm stock rotor's. I would double check with someone else to make sure.
What are you doing with you rear disc setup when you get the calipers?
conversion link
link to specs
It would make sense that you have the 240mm stock rotor's. I would double check with someone else to make sure.
What are you doing with you rear disc setup when you get the calipers?
conversion link
#3
I believe the front rotor on the EG Si might be bigger...
You car was a Si right Jamie???
ABS or non ABS???
Please advise...
9.45 inch for the front CX/DX/VX disc with rear drums..
10.38 inch for the SI with rear disc at 9.43...
Hope that helps...
You car was a Si right Jamie???
ABS or non ABS???
Please advise...
9.45 inch for the front CX/DX/VX disc with rear drums..
10.38 inch for the SI with rear disc at 9.43...
Hope that helps...
#4
Originally posted by 94EG6HB
I believe the front rotor on the EG Si might be bigger...
You car was a Si right Jamie???
ABS or non ABS???
Please advise...
9.45 inch for the front CX/DX/VX disc with rear drums..
10.38 inch for the SI with rear disc at 9.43...
Hope that helps...
I believe the front rotor on the EG Si might be bigger...
You car was a Si right Jamie???
ABS or non ABS???
Please advise...
9.45 inch for the front CX/DX/VX disc with rear drums..
10.38 inch for the SI with rear disc at 9.43...
Hope that helps...
Tis right! My car is an SI non ABS.
#6
Originally posted by 94EG6HB
No problem...
Curious...
Why you askin???
No problem...
Curious...
Why you askin???
Upgrading to 4 pinton Wilwood calipers and I need the stock sizes to order the right calipers!
#7
But if you are using larger rims...
Why wouldn't you go with a larger than stock sized disc...
BIG BRAKES if you will...
I got the first part fine...
Thanks buddy...
Did I mention I hate you????
:cry:
Why wouldn't you go with a larger than stock sized disc...
BIG BRAKES if you will...
I got the first part fine...
Thanks buddy...
Did I mention I hate you????
:cry:
#8
Originally posted by 94EG6HB
But if you are using larger rims...
Why wouldn't you go with a larger than stock sized disc...
BIG BRAKES if you will...
I got the first part fine...
Thanks buddy...
Did I mention I hate you????
:cry:
But if you are using larger rims...
Why wouldn't you go with a larger than stock sized disc...
BIG BRAKES if you will...
I got the first part fine...
Thanks buddy...
Did I mention I hate you????
:cry:
I don't think you really looked at my car closely!
I have larger than stock size discs! AEM big brake OEM relocation kit. Just want to add the better than stock calipers!
Aaron, I'm afraid I'm going to have to give you a C- for comprehension!
As far as you hating me, you love me and you know it!
#9
C- WTF I want I retest...
I was going through beer withdrawl...
90EFHB tried to help me out yesterday at after dinner...
But it wasn't enough...
Yeah, I guess I love you too..
In a heterosexual way...
I was going through beer withdrawl...
90EFHB tried to help me out yesterday at after dinner...
But it wasn't enough...
Yeah, I guess I love you too..
In a heterosexual way...
Thread
Thread Starter
Forum
Replies
Last Post