Bryce

Just curious this girl at my work drives a Honda CR-V.
She was telling me she got this noise while turning. So i automatically assumed driveshafts. Check those out and there fine its a squeaking not a clicking and the car only has 90xxxkm on it. Sorta a screeching sound from the front and its only upon sharp cornering.

I asked her and she said the sound is coming from the front of the vehicle. I also asked her to start her ride up and crank the wheel to listen if it was just the powersteering pump but no noise at a standstill. So any suggestions?

chris_si98

its the bj's..

lift the car and shake the wheel at 12 and 6

Bryce

thats what i thought. Thanks Chris ... i actually thought you meant ********.. then after some clever thinking i realized you meant Balljoints. ... anyways thanks haha.

chris_si98

np

dingus888

I woudl think ball joints

get a nice big pry bar or huge slotted screw driver and stick it between the b joint and control arm and pry this will show any looseness

also could be seized slidder on caliper casue binding of pads

usually b joints will creak while goign over bump sor turnign wheel slow speed

WankelWanker

it's either balljoints or stabilizer links....check both to be sure.

nrg3k

i read somewhere that a front-noise in a CRV is actually diff fluid. the back diff is actually making the noise, but because its rubber-mounted, or something, it vibrates up to the frnt. not sure if this is correct, but its what i read on a crv forum.

DJM:>