pain2bare

Chassis Code: EJ

B16A2
..
Displacement (cc): 1595
Power (bhp@rpm): 160@7600
Torque (ft/lbs@rpm): 111@7000
Compression Ratio: 10.4:1
Bore (mm): 81
Stroke (mm): 77.4
Cam Design: dohc
VTEC?: yes
OBD: 2
Year(s) Produced: 1999-2000
In the following car(s): Honda Civic Si

cee_mon

EJ are coupe...but to check 100% its in your vin on your car...
You will see EJ and a number right after it.
For example....mine 95 coupe...EJ1

DumbasSi

Unless your car is from the US or has a B16A2 swap, then that info is incorrect. The Canadian SI came with a D16Y8 as the stock motor. The SIR has the B16. The SIR is called the SI in the states though, so your info is probably from an American source.

bdotdan

uhh, no your partially wrong.
out of all 5th gen civcs, only coupes were EJ's
BUT
all 6th gen civics in North America except canadian sir's, american si's, and del sols had EJ chassis codes.


6G (1996-2000)
EG1 D15B8 USDM 1996-1997 del Sol (8-valve)
EG1 D15B7 USDM 1996-1997 del Sol S (SOHC)
EG1 D15Z1 USDM 1996-1997 del Sol VTEC-E (SOHC)
EG2 B16A2 USDM 1996-1997 del Sol VTEC (DOHC)
EH6 D16Z6 USDM 1993-1995 del Sol Si (SOHC)
EJ1 D16A JDM All 2-door
EJ3 n/a JDM All 2-door / 4WD

EJ6 D16Y7 CANADA All 2-door DX/Si
EJ6 D16Y7 CANADA 2000 2-door DX-G
EJ6 D16Y7 CANADA 1996-1998 3-door CX/CX-G
EJ6 D16Y7 CANADA 1999-2000 3-door CX/DX
EJ6 D16Y7 CANADA 2000 3-door SE
EJ6 D16Y7 CANADA All 4-door LX/EX
EJ6 D16Y7 USDM All 3-door CX/DX
EJ6 D16Y7 USDM All 4-door DX/LX
EJ6 D16Y7 USDM 1999 4-door DX-V
EJ7 D16Y5 USDM All 2-door HX (VTEC-E)
EJ8 D16Y8 CANADA All 2-door Si
EJ8 D16Y8 USDM All 2-door/4-door EX
EK2 D13B JDM All 3-door/4-door
EK3 D15B JDM All 3-door/4-door
EK4 B16A JDM All 3-door/4-door
EK5 D16A JDM All 4-door 4WD/LEV
EK8 D16A JDM All 4-door 4WD/LEV
EK9 B16B JDM All 3-door Type-R

EM1 B16A2 CANADA 1999-2000 2-door SiR
EM1 B16A2 USDM 1999-2000 2-door Si

the specs you posted are for Canadian sir's and american si's, though they got the chassis code wrong, it should be EM1.

you have a EJ8, with a d16y8 motor

pain2bare

Ok, thanks for helping me sort that out fellas. Now I would assume that I could use these codes to perform searches here, is there a way that I can tell whether a part will fit my car?

pain2bare

How can I tell if these are the specs for my car(2000 si coupe)?

Chassis Code: EJ8

D16Y8
..
Displacement (cc): 1595
Power (bhp@rpm): 160@7600
Torque (ft/lbs@rpm): 111@7000
Compression Ratio: 10.4:1
Bore (mm): 81
Stroke (mm): 77.4
Cam Design: dohc
VTEC?: yes
OBD: 2
Year(s) Produced: 1999-2000
In the following car(s): Honda Civic Si


went to ct for an oil change and the dude there gave me different info than what I've found here. I have to assume that the info found on the tcc is right but maybe I've got my numbers wrong?

bbarbulo

iTrader: (2)

D16Y8 has 127 hp factory rated

you have an Si or an SiR? USDM or CDN?

one cam or two??

EJ8 is 127, EM1 is 160 hp

bbarbulo

iTrader: (2)

BTW, I rock an EJ6 D16Y7 107 hp

pain2bare

Thats what I'm trying to find out, it's a Canadian Si and would assume from looking under the hood it's a dohc.

imported_kIeRaN

if its a candian si, then u have the d16y8, sohc vtec trust me, ud know if you had the sir.

best way to check to see if your car has the sohc vtec motor is to check the small code on the engine block, if u can find it, it will say d16y8