punkindrublic

so today out of boredom and since i have a long week i'm cutting up my neuspeed race spring and using them with my coilovers...

the main reason is to loose the harshness of those coilover springs due to them being short and stiff and the race springs being long and progressive...

i'll post up pics with progress

imported_carjunkie

You suck.















j/k

What happened, I thought you were selling the springs to me?

imported_My93Civic

he hates you.

imported_kIeRaN

post up pics! tell us how they feel....

punkindrublic

got the fronts set up gonna toss them on... i gotta cake on the rubber paint though cause if they chip thats a lot of exposed metal :cry:

bbarbulo

iTrader: (2)

why are you cutting them?? can't you just throw them on as-is? sorry for the ignorant question, I don't know what coilovers you have....

punkindrublic

they'd be to long i'm thinking... plus the coil over springs are flat on the top and bottom so i figure having the race springs grinded like so would be good too

bbarbulo

iTrader: (2)

well, don't guess.... lower the perch all the way down and measure the total height of the assembly... and the spring does not have to be ground down as long as it has a pre-load on it so it stays seated on the top hat.