Question About Tokico Shocks
I just bought a used set of Tokico Illuminas which were shipped to me. I have never seen any type of aftermarket shocks before so I wasn't sure whether or not I recieved all the correct pieces or not. As you can see in the picture, the rear shocks seem to have all the necessary pieces, its just the two front shocks which I am not sure about. I got two washers one which is gold and the other black. I am just curious, am I missing a set of washers or does the gold one go on one shock and the black washer on the other? Also, I have the little adjustment knobs for the shocks, so is there anything else that I am missing?
http://www.photohost.org/gallery/dat...3PICT00041.JPG |
you can reuse all the other parts off your old struts... make sure to use the bump stops off ur old ones too fpr the fornts...cut in half
|
you should have all the hardware for the front shocks... but you'll need a bump stop for the fronts....
for the rears you'll have to reuse that gold washer thing with the taper that fits on the shock rod... but bump stops are provided welcome to the world of sexy shocks :nods: |
although by the looks of your pics you have 4 gold washer things so you dont need to reuse... unless i'm miss reading the pic :shrugs:
|
Yeah actually in the pic there are 3 gold washers, one of the ones laying on the carpet there is a black washer, slightly different in size. Either way I guess I am say if I can reuse the other parts
|
ya you can reuse it all if you want... i remember mine came with the front gold washers but not the rears... those were fun to remove from the stock shocks :)
|
you can reuse the washers...but id use the new bumpstops and the new strut rod bushing things that go on each side of the top hat...id even consider getting new top hats
|
All times are GMT -4. The time now is 05:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands