imported_92honda

clutch seems to engage, but car wont go into gear.. any ideas?

b18bHatch

leak in your lines

imported_username

Why do you say it "seems to engage"?
When you say it won't go into gear, is it the shifter that won't shift into the spot or does the shifter go in but the car doesn't move when you let out the clutch?

imported_chris_v2

you just have air in your lines. Bleed your slave

imported_92honda

The shifter shifts, yet the car doesnt move when i let out the clutch. I've bled the slave many times. Im thinking its the shift rods?

imported_chris_v2

wait.. what?!?!

your shifter shifts? so you can get it into gear? but if you let out the clutch, nothing happens? Check if your slave pin/piston is pushing on the clutch fork properly. Do you actually feel like lock into gear? or no? if it doesnt.. you have a problem with either your transmission, or your shift linkage. If its for EVERY single gear, chances are its your rods

imported_92honda

Slave is fine, i just replaced it. Im almost sure its the rods now. But yes, when i put it into gear, and release the clutch, the car doesnt move.

imported_bananax

you probably roasted both of your axles/drive shafts

imported_Cablerat

Is there any changes in sound when you release and engage the clutch?

When you shift gears, can you actually see the linkage @ the transmission moving? Usually if a fork is the problem, your clutch will stay permanently engaged.

This should be fairly easy to diagnose.