Asselin

So I was taking out my rear stock suspension to throw in my koni and ground controls didn't work out too well.

The rear LCA bolt snapped, on both sides, so I'm wondering where I can buy some bushings for that. Its for a 96 Integra LS.

I'm going to the honda dealer Monday to see if there have any, but if they don't I want a back up plan because I really need to get this done so I can drive my car again.

All I need is the bushing that goes through the lca to the rear shock fork, and the upper. Shown here.

I used a torch to get the bolt out and the inner metal part on the bushing came out as well.

And here, I need the bushings for the, Upper control arm, (RED) ( I think thats what it is),
So I figured out after, it would of been easier to just take out the two bolts on the top, PURPLE, instead of the other single bolt, that does have a bushing. Meh


So if I can't get ahold of the bushings at the honda dealer, I'm gonna prolly go with Urethane bushings, and I wanna know where I can get some

ANyone got a website, cause I'm in Sudbury, so I'd just ahve them shipped to me

Thanks guys.

bbarbulo

iTrader: (2)

any performance shop should have some. check concepts on wheels and parkway honda.

Asselin

Would you know if the bushing on the rear lca and upper control arm is the same part # on the 92-95 as the 94+ integra? Cause i heard it was, just wanna confirm.

bbarbulo

iTrader: (2)

rear LCA yeah, I'm not sure about the rear upper control arm. check energysuspension.com

Younes Si

ya, that does suck i snapped mine while trying to put it on

Asselin

I might just get some omni-power lca's. Their only 159.99 at optionjdm

My buddy told me that the OEM lca bushings are like 40 bucks a piece, plus if I gotta get them pressed out. Might be 'easier' to get new lca's.

Anyone have experience with the omni-power lca's??