imported_h22

im swaping a dohc zc into a 88 crx si and one plug doesnt fit small silver box in the top right hand corner my crx has a square plug and the box has a circle any ideas? will post pics in a miniute...

imported_h22

THIS PIC IS FROM THE 90 CIVIC IT CAME OUT OF...

imported_h22

ok now iv noticed a whole bunch of wires dont fit im not sure how thats possible as this motor did just come out of a 90 civic hatchback wirering should be the same? any recomendations? remove the harness from the old (d16a6) and put it on the dohc???? anyhelp is appretiated....very confussed...thanks...

89SIHATCH?

that metal box is called the resistor box.
anyways here try out these links here maybe you can find some helpful stuff there.

ZC page
and here is some info on the wiring.
zc wiring info

89SIHATCH?

there should only be the green square plug on the resistor box.
and the square plug and circle plug on the harness. the square goes to the square and the circle to the other part of the harness.

what harness do you have? ZC or civic? if civic si or dx converted(made to si)?

imported_h22

thanks,,,,89SIHATCH?..........
IT CAME OUT OF my freinds 90 CIVIC si.... so i think its an si. harness/??and its went in to my bro,s 88 crx si. so it all should fit..plug and play.,,.no????...............need,,,, help.......pls,, help,,,

89SIHATCH?

did you do any research before hand?
i think there is a plug or 2 to swap or something.
but its si to zc so its already MPFI.

imported_CRXXX

anyone have a simple soulition need this bad boy up and running

imported_FlashPoint-Matt

simple solution is to swap the plugs.

each injector pulse wire runs through the resistor box and back to the injectors. Only OBD-0 injectors do this because they are low-impedance injectors.

If you would like I can come to your location and do the wiring for you. Either that or you can tow it to me shop and i'll do it.

FYI, im a licensed mechanic so I can guarantee & warranty all my work.

zeeman

iTrader: (1)

ur shop must be hurtin for work, if you've gotta come on these boards and try to spam yourself out like you have.....hahahaha

89SIHATCH?

imported_rhd_ef

banned owned lol

imported_CRXXX

NEED MORE INFO!!!

wanna get this done on the weekend but i need more info...iv been car-less for a week driving the parents van is not fun lol if i swap the whole wiring harness off my old motor (d16a6) will it work??? anymore help is very much appreciated

89SIHATCH?

if you knew how to trouble shoot and use search on the internet you woulda had it done by now.

imported_CRXXX

well i dont wanna goto all the work of doing somthing like take my old harness off and putting it on this motor too find out it doesnt work...

imported_CRXXX

anyhelp?? gotta be done this weekend AHHH

imported_SMGFANDOTCOM

You use the harness off the motor that was in the car.

imported_SMGFANDOTCOM

Then you have to repin the distributor wires the 2 green wires in the si dizzy plug will now go to the cam angle sensor.

Might be some other stuff but it's been a while since I played with a dohc zc



Should have just kept the sohc

imported_CRXXX

ok i put my old wireing harness on the ZC all is hooked up all i need is too know how too repin the dizzy does anyone have details hopfully with pics is best...

thanks

imported_CRXXX

anyone...? has no one had too wire a zc before?