imported_EG_KID

i don't really know much about cars .....**** **** ....i have an 98 ek hatch ...engine is about to go ..so i m planning to put a h22 ....don't know if there s a difference between the 92-96 or the 97-2001 ....which one is better ...and do i still use the h22 cpu that come with it or do i need a custom one ...i know i need customs mounts.... can anyone please tell me what exactly i need to do this conversion .....thanks for ur help ...oh ya would i be able to keep my ac and power steering

white92d15b7

do some research on the internet, there is a million websites devoted to this monster swap, no one here is gonna lay out directions . . obviously you should be taking the car to a shop to have this done they will quote you a price for everything you need for the full install and will probably do it for you . . .

imported_blk98cx

well first off teknotik has a special going on with there jdmh22...check them out they have a good price for a complete swap!!! the only hard part for this swap is the wiring!!! you needs someone who has knowledge about this wiring,this is the only hard part for this swap!!! everything else is about linning up!! teknotik already will give you a custome axle for this swap so one less headache for you!!!the shifter you just need to cut a hole for it and bolt it up(for pic check honda-tech.com) your gonna need custome mounts but teknotik will also provide that one more less headache!!! go to a shop that has done this swap so one more less headache for you!!!

yes you can keep the ac and power steering but you gonna have to customise more!!!!! dont have any info on this coz im currently running no a/c no p/s!!! and im happy with it...less strees on the engine!!!

overall its a good swap!!! im happy with mine!!!fun car to drive for sure!!!with the torq!!! wow!!! this summer im putting stage one clutch and light flywheel,wanna see that rpm climb faster!!! no regrets!!!

imported_t_dot_SiR

you need the h22 a/c compressor and power steering pump.... which will be included with the teknotik deal

but if you're planning to use your own a/c compressor, you need custom brackets

USDMSIG

Just get HCP mounts and there ac bracket, and u can use your stock d16y8 compressor. Getting the h22 one to work is going to be a pain in the *** , no room......your gunna run into clearance issues.

The wiring isnt to bad, Its mostly extending wiries so they reach the sensors, also need to wire up the resistor box, Take your time and read up on it...very doable .

imported_Team Rukus

so looks like you will be taking out your entire drivetrain to do this eh?

USDMSIG

LOL...he doesnt have to...it tighter in there then a bseries clutch install. but its still doable without taking the motor out.

imported_blk98cx

yeah i know!!! i should have done it before i did the swap. i was out of budget!!! im not thinking about the install,im thinking about the result!!! for sure ill be happy with it anyways!!! ill try to take pic so i can put a how to!! hehe