Civic Forumz - Honda Civic Forum

Civic Forumz - Honda Civic Forum (https://www.civicforumz.com/)
-   Honda Civic Performance - JDM Discussion (https://www.civicforumz.com/honda-civic-performance-jdm-discussion-14/)
-   -   My car sounds like a harly, and power loss/bogs...help me please :) (https://www.civicforumz.com/honda-civic-performance-jdm-discussion-14/my-car-sounds-like-harly-power-loss-bogs-help-me-please-27868/)

imported_corcoran_chris 07-Sep-2003 01:09 AM

My car sounds like a harly, and power loss/bogs...help me please :)
 
ok I belive its a b18a, an integra LS engine

my car, after driving it on the highway for a few kilos crusing at around 150 ish i get off the highway and my car started to sound like a harley, and has poor power gain/bogging down. The exhaust is brand new so that is not the problem


today I baught new plugs, and new plug wires

that didnt do anything

there is still the problem, and the engine shakes slightly more then normal, my RPM is normal and there is nothing obvious that I can find wrong


please provide some input, if any, im going to work on the car tommorow so let me know asap- and to keep this post going fast if you have a question to me, just ask, but provide an aswere to your question as if I did/have/tried what you mentioned, just saves allot of time.

thanks allot, I appreciate it
:cheers:

imported_loudsubz 07-Sep-2003 01:28 AM

did you look under your car for any exhaust connectiosn that mayb have broke/come loose?

punkindrublic 07-Sep-2003 02:05 AM

your exhust probably split or something like that.... mine split right under the shift rod before... it sounded really cool... though my neighbours didn't think the same

Quick_CX 07-Sep-2003 06:13 PM

sounds more like a dead cylinder.....i had same problem, it was a broken spark plug wire...u may hae a dizzy problem....i am putting my money on ignition system and a dead cylinder

Quick_CX 07-Sep-2003 06:16 PM

that woudl explain teh shake, and HUGE power loss..you wouldn't get a HUGE power lose from broken exhaust, turn ur car on and take a pair of pliers and pull number 1 cylinder wire, then put it back in do teh same for 2,3,4 cylinders...each tiem u do this the engine should loss that cylinder while the wire is out, the cylinder that makes no difference when u pull teh wire is your dead one...then u can go from there....but bring it in to a mechanic imediatly...dead cylinder means you have a floating piston

red90dx 07-Sep-2003 08:38 PM

check out your distributor....or tps

Quick_CX 07-Sep-2003 08:41 PM

:nods:


All times are GMT -4. The time now is 11:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands