rdy2spry

K i have a 93 civic si hatch, with a JDM b16 motor in it. I had to use the exsiting wiring harness from the d16, only because the b16's wiring harness would not plug and play like I hoped for. Neways, there are 2 plugs that have no been plugged into the motor, cause there r no spots for it to b plugged into.....some of the harnesses wires had to be lengthened but that was no big deal, everything is hooked up, minus the knock sensor, i am just going to get that disablled thru a comp chip. Ok the reason why I need help, is that the motor won't turn over, and it did a few days ago no problem. I am getting the CEL codes......6 short, 1 long, and 2 long. All completely different series of flashes. Neone have an idea.....? BTW, battery has to b boosted off of mine, cause it won't hold a charge.......when i do try and turn it on, it turns over for a quick second and sounds like it's gonna start but with no prevail it keeps on trying to start. Does neone kno the wat code those flashes r, and wat else could b wrong. thnx.

zeeman

iTrader: (1)

here's a link to the codes and how to read them.
http://www.honda-tech.com/zerothread?id=682412

bbarbulo

iTrader: (2)

ok first you say that the engine won't turn over, then later you say it turns over for a quick seconds and sounds like it's gonna start but it doesn't. So which is it?? turn over or not?