Keep Getting CEL43
 

well like it says, i have just swaped in a Z6 into my rex, i did the total swap, OPBD1, and everything, i have been having no problems with the car, exept for this CEL 43 that pops up everynow and then, i know its the Fuel Sapply system code, but i dont knwo what to look for, i origanaly had a Y8 intake and i was throwing the code then, now i put the stock Z6 intake,(which has diff. injectors and fuel rail, TB,IACV,everything) and its still throwing the code.
OH and my fuel pressure is set at around 40-41 at idel and its about 50 with vaccume line off and blocked. plz help it seems like my fuel millage has gone to s@#$ too.

i am getting the same problem with my car too :S and my car bogs like crazy above 4000 rpm

mine seems fine at mid to high rpm, the only time its seems to lag, or more or less studder somtimes is right at take off,

its a total Z6 swap nothin under the hood is CRX anymore, if that helps any

try to check the 02 sensor reading

what other sensors would thro this code? would a TPS do it?