imported_weiRtech |
13-Dec-2005 07:19 PM |
i'd check the gear ratios on the tranny, that is how i made sure my ys1 was a gsr tranny and not an ls. you put it in 5th gear, multiply your 5th gear ratio by your final drive and that is how many times you have to turn the input shaft to turn the axle output 1 full revolution. someone correct me if i'm wrong, it was a while ago when i did this. as for the head, i'm not sure, but there should at the very least be a date stamp on it somewhere, but that is probably about all you are going to get.
|