installing bov on mr2?
 

how hard is it too install a bov on my mr2? any links with pics or details is good thanks

:cheers:

its very easy.

All you have to do is either weld the BOV right onto the charge pipe, or weld a flange onto the charge pipe and bolt the BOV to the flange. Then hook up the vacuum line to the intake manifold (or other apropriate vacuum source).....provided the car isn't already equipped with a BOV or recirculation valve like its sometimes called.

i was told the stock blow of vavle re-vents too the intake if that makes any sence?

thats why they're sometimes referred to as recirculation valves...b/c the air/pressure it lets out, it routes back into the pipe before the turbo, recirculating the air.

soo if my car already has the stock "recirculation valve" is there somthing else i have too do besides weld a spot for the new bov and run the vacuum line?

i would imagine the easiest solution would be to replace the stock bov with an after market one if that is what you are after. you would run the vacuum line off the oem bov to the replacement unit and let it vent to atmosphere. i'm not sure what the mounting looks like, if it is just a flange then just bolt on a different bov with the same flange pattern... if it is some weird bov that is part of the piping or something, then you could replace that section of charge piping with a fabricated one with a new bov mounted onto it. i have seen the toyota intercoolers that are top mounted (over the engine) with a bov flange welded onto the pipe section of the end tank.

pics would help a lot.

pics would help me too haha i see the charge pipe but theres no stock bov that i see...soo odd i dont know...but if im really quiet between shifts i can hear it...il run out and take some pics right now of the engine bay...be up in about 10 mins or less check back :cheers:

ok i think i figured it out but just for the hell of it heres the pics and yous gimmi the details and il see if im right lol

Attachment 39065
Attachment 39066
Attachment 39067
Attachment 39068
Attachment 39069
Attachment 39070

(all pics were tooken with a razr cell phone lol)

anyone wanna just put it in simple steps :D

1
2
3...

or if i take off the one tube that vents too the air box would that make it sound louder? rather then buying an after market bov??

anyone??? hello?

you'd probably have more luck on a toyota (MR2) forum....this forum is for hondas....so i doubt too many people know about MR2's.

aiet thanks anyways...if anyone else happens too know though lemme know other wiase im done here lol

:cheers:

remove recirc valve
put in a pipe with a blow off valve in its place lol easy!

and dave stick the vaccum tube in your ass it will blow louder haha :) good luck man

MAF system not a good idea, he needs a bov that can recirc

he likes doing chop jobs if it runs hes happy lol

****ing guy ^^^

by the way everyone thats the guy who installed the wrong size HIDS in my civic for me and then second off used eletrical tape ya thats right eletrical tape too hold then in place

dam every time i hit a bump i would light up the sky they bounced like a ***** dam dont let him install you **** lol :)

and the other side of the story iss i specifically told him they werent the right bulbs for that housing and he insisted to put them in anyways because his blew (because mr CRXXX broke the filament by smacking it into the body of the vehicle LOL) . I did the best i could to keep them in there and they stayed! and u sold the car andthey still worked perfect ! hacking dave is his name haha

haha yo the guy i sold it too was kinda pissed though he was talkin too me saying how the hids are loose funny thing is he hadnt even looked and seen they were taped in LOL i forgot too mention my bad?