92JDMx

After putting my head back on the car, it has run like crap, my idle sits pretty high.. i dont have a tach so i couldnt tell exact... but my vacuum pressure is sitting in the driving range...

So i read up about check IAVC and FITV, i do get the code of for IAVC does it mean its busted/needs cleaning ? or my connector maybe wrong??

I also get the code of 36, which is Traction Control found in JDM Ecu's i m pretty sure i read this code right, but i have never ever had this one...

i just want a little insight before i take the IAVC off, i have also checked my TPS which is set to .45ish closed.. so its not a problem with that...

and does anyone have the wire colours that go into the IAC i want to double check them... its the one that barely reachs correct?

chris_si98

my bet would be you have a vacuum leak some where. I assume you disconnected some hoses when you took off your head and IM?

92JDMx

yep, but i have checked all my vacuum lines.. but i might possibly have the wrong plug in my IAVC i found the colours which i will check 2morrow.. if i had a leak i would assume my vacuum gauge would be in the bad section, because it would create a constant loss, but i do get a vacuum pressure as if the engine were driving