4ever

alright...heres my question now
for a B18C5
a 4-1 header , stright pipe exhuast 2.5"
milled head..port and polish intake and exhuast
valve angles adjusted
Toda B cams with Toda Cam Gears
vafc tuned
dyno tuned
how much horse power am i looking for in those setups
am i able to get like 190 WPH?

zeeman

iTrader: (1)

loose the vafc and get a custom chip burned and you will get even more power. But your estimate is a valid one.....this isn't a e-dyno.....go to the dyno and find out....and report back to us.

4ever

the ecu is already chipped, sorry to forgot to mention about it

zeeman

iTrader: (1)

well there you go, you're golden. Go to the dyno and tell them to burn you a custom program on the dyno using a wideband o2.
Go...go now.....NOW!!!
I am curious to see the results.....post the graph too once you go. You might be surprised with the results.

Younes Si

I wish it was :cry:

LEITNER

depends on who does the engine build. that setup in the right hands could make 200-210whp depending on your compression. i have built a simillar engine that was 84mm bore and 11.5:1 compression and it made 210whp 135lb/ft torque with the toda B cams. i will say the builder will make the difference between 190 and 210whp...remember that.