horse power question
 

alright...heres my question now
for a B18C5
a 4-1 header , stright pipe exhuast 2.5"
milled head..port and polish intake and exhuast
valve angles adjusted
Toda B cams with Toda Cam Gears
vafc tuned
dyno tuned
how much horse power am i looking for in those setups
am i able to get like 190 WPH?

loose the vafc and get a custom chip burned and you will get even more power. But your estimate is a valid one.....this isn't a e-dyno.....go to the dyno and find out....and report back to us.

the ecu is already chipped, sorry to forgot to mention about it

well there you go, you're golden. Go to the dyno and tell them to burn you a custom program on the dyno using a wideband o2.
Go...go now.....NOW!!!
I am curious to see the results.....post the graph too once you go. You might be surprised with the results.

I wish it was :cry:

Re: horse power question
 

depends on who does the engine build. that setup in the right hands could make 200-210whp depending on your compression. i have built a simillar engine that was 84mm bore and 11.5:1 compression and it made 210whp 135lb/ft torque with the toda B cams. i will say the builder will make the difference between 190 and 210whp...remember that.