SiR_88crx

alrite so heres the deal:

i recently swap in a 94 ls motor into my eg about a week ago in my garage... i have pluged in just about everything but im not getting any power from the battery(i checked it and it has full power)...as for the plugs that arent pluged in i dont have a dash in so i know some of the plugs go there... i even tried jump starting it but it still did not work. i also tested every fuse and they are all fine.. i have even tried testing all the wires with a micro meter to see if maybe one of the wires could be broken inside but still nothing..i also tried moving around the ground wire...still no luck.. i have checked everyhting over many many many times but i cant find the problem...so i dont know what else to do or check..

anyone got any idea of what it could be or what to do?

thanks to thos that help

zeeman

iTrader: (1)

is your ecu plugged in?
Are ALL of your grounds connected properly?
Both terminals on your battery tight?

chris_si98

you sure your connection is good? you sure the ground cable is actually grounded?... thermostat ground? Howd you test the fuses? Is your ecu plugged in?( ive seen it happen)

chris_si98

dont copy me seemen

zeeman

iTrader: (1)

riiiight karl.....riiiiiight
come get your damn flywheel

SiR_88crx

yupp ecu is pluged in

yes they are all connected

and yes they are tight

SiR_88crx

i tested the fuses with a fuse tester(that white lil thing with the three lil pins and green lights)

ecu is pluged

i am sure

chris_si98

maybe if you would answer me I would swing by seemen