help me with my vtec wiring!!!
 

hi there, i need help wiring up my vtec, im putting in a ZC SOHC VTEC into a VX model civic. Tere is one green connector to the top left of the valve cover,. impretty sure that that is it, it has to wires coming from it that are cut..

PLESAE HELP ASAP

i think the green one is the vtec oil pressure ... i'm not too familiar with the zc sohc though... then there should be another cut wire for the vtec sylinoid

there is another wire right close to it that has been cut as well
I have now clue where to wire them too

can you get a picture?..

are you talking about two wires in one connecter... if it is the oil pressure then one is from the ECU and one is ground..

i cant get pics but ill try to describe it to u, the green connector has 2 wire coming from it, a blue/black one and a black one. They r bvoth cut.... the other wire ius just below it and is coming from a group of wires rite close to it, it is a brown wire

hmm ye usualy the blue wire is the live one so connect that to the ecu and the black is the ground.. as for the brown wire... i'm not sure..w hat is it connected to

umm, u know that big group of wires that has that black coverung overtop, its coming from there, and where do i attach the blue wire on the ecu, my car used to have vtec u know

so u have two cut wires on the new engine and only one from the old harness?

no man, this brown wire is rite undernieith sort of where the green conector is, its not from the old harness, as for the blue wire, where do i hook it up!

OKAY people, i need some serious help, i wanna get my vtec in soon, so,. that brown wire i was tralking about, forget about that, thats nothing, i know whatr the blue wire is now and i have attached the black ground wire(these two wires are comming from that green connector).... Now, i need to figure outr where the last wire will be, i know there is a vtec solinoid wire, a vtec pressure and a ground, where is the last wire??? i have only fgound the 2