imported_blk98cx

i just drop an h22a on my 98 civic cx and everything is complete...my problem is the axles....i got some teg axles on both side and my mid shaft is the stock prelude tht came with engine...now when i drive i hear grinding sound from the axle and when i have it up on the hoist and i spin the wheel the engine goes up and down...now im thinking it could be the mid shaft and the axle...some people is telling its the mounts(enjo mounts bought for like 3 bills)...can someone pls tell me which axles should i use like the year and stuff....remember its 98 civic cx..thanx

imported_Cablerat

You need to contact ENJO and find out specifically what shafts are required.

When I did my H22a into a 93 Si I also had 2 integra shafts on an Accord midshaft using HCP mounts. At first it looked fine, but when I was driving I realized the passenger side shafts was making a weird sound.. Then when I removed the shaft I realized it was about 1" too LONG and wasn't locking into the transmission.

When I checked out HCP's site, I found out that you have to build a custom shaft out of half integra and half prelude parts.. SOOO I grinded down the inner boot about an 1" and got the shaft to lock in properly.

Sorry I don't know what shafts you need specfic but thought I'd tell you bout my experience..