1sloweg

clamp every flex hose with pinch off pliers, or vise grips. Sit inthe car and hold the pedal down hard, it should be stiff. Now get somebody to release each corner, they should all drop the pedal equally. The one that drops the most is where your problem is, whether it be a leak, siezed sliders.


Did you try bleeding the abs.... or activating the abs pump...

imported_Cablerat

All the sliders are clear.. I replaced all rotors, pads and lubed the **** outta everything when I did the MC replacement.

Haven't done anything with ABS.. Not sure if I can even get the ABS to activate with a soft pedal.. GOnna have to find a gravel road or something.

imported_JDMWHACKO

You bleed ABS brakes just like you do Conventional brakes.... there is no difference


have you tried adjusting your ebrake cable lately?


when you replaced your brakes did you lube all the sliders and check the dust boots?

imported_Cablerat

Yep..

Problem is solved.. Did a few runs, setting ABS off and bled multiple times in the proper direction. Everything is lubed up and working well.

Thanks.