gsr cams in a b16

Reply Subscribe

Thread Tools

Search this Thread

26-Aug-2004, 02:26 PM

imported_Dawson

Registered User

Thread Starter

Join Date: Jun 2003

Location: CFB Gagetown

Posts: 2,216

gsr cams in a b16

would it make a difference if i put gsr cams in a b16a

26-Aug-2004, 04:53 PM

punkindrublic

Senior Member

Join Date: Apr 2002

Posts: 12,906

to my knowledge the gsr b16a cams are more aggressive then the b18c

26-Aug-2004, 06:19 PM

SilverSIR

Registered User

Join Date: May 2002

Posts: 77

^^wrong.

Only difference between the two cams are that gsr cams have a higher duration than b16 cams.

It wouldn't make much of a difference if you where all-motor however, if it where for a turbo appl. car it would.

26-Aug-2004, 06:45 PM

punkindrublic

Senior Member

Join Date: Apr 2002

Posts: 12,906

ouch... i had heard that

maybe i'm thinking of comparing b16b and b18c5

26-Aug-2004, 08:23 PM

red90dx

!!!!AWAITING CONFIRMATION!!!!!!

Join Date: Jun 2002

Location: not at the pump...

Posts: 933

gsr cams are b18c blocks in japan, both the type R and gsr are b18c stamps...

again gsr cams are hotter,

the best STOCK honda cam setup is the B16B, OR R setup.

08-Sep-2004, 12:23 PM

imported_Dawson

Registered User

Thread Starter

Join Date: Jun 2003

Location: CFB Gagetown

Posts: 2,216

cool thanks

08-Sep-2004, 05:49 PM

imported_EM1Turbo

Registered User

Join Date: Feb 2003

Location: In a tree

Posts: 320

100% accurate cam specs.

Following cam measured with 0mm of lift:
Civic SiR(1999/2000 Spec. b16a2)
Int-265 dur. / 10.5mm lift
Exh-267 dur. / 9.6mm lift

Integra GS-R
Int-274 dur. / 10.7mm lift
Exh-276 dur. / 9.6mm lift

Civic Type-R And Integra Type-R(Integra Type R 2000/01 Spec)
Int-278 dur. / 11.5mm lift
Exh-280 dur. / 10.5mm lift

Following Cams Measured at 1mm of lift:
Integra Type-R(Through 1999 Spec)
Int-240 dur. / 11.5mm lift
Exh-235 dur. / 10.5mm lift