Civic Forumz - Honda Civic Forum

Civic Forumz - Honda Civic Forum (https://www.civicforumz.com/)
-   Honda Civic Performance - JDM Discussion (https://www.civicforumz.com/honda-civic-performance-jdm-discussion-14/)
-   -   Grindish Noise Coming From Shfiter (https://www.civicforumz.com/honda-civic-performance-jdm-discussion-14/grindish-noise-coming-shfiter-104359/)

imported_JoonyaSI 26-May-2006 09:22 AM

Grindish Noise Coming From Shfiter
 
1997 EK Coupe SI (MT)

when i drive my car in 3rd or 4th mostly its heard ...

basically when my RPMs are at around 2800-3000 and i take my foot off the accelerator i hear a grinding type noise coming from my shifter and it rattles my shifter ...


whats causing that and whats the best way to get that fixed ?

imported_mikepasini 26-May-2006 09:28 AM

more of a rattling noise? its probably just your shifter linkage rubbing up against your exhaust pipe or something.

Double_B 26-May-2006 09:32 AM


Originally posted by mikepasini
more of a rattling noise? its probably just your shifter linkage rubbing up against your exhaust pipe or something.
Don't think that would make a grinding noise and if it was, he would feel it hitting it for sure. I believe your shifter is stock right Terry?

I'm thinking Tranny or clutch.

Cynikal.Mindset 26-May-2006 11:22 AM

shifter bushings, replace them

imported_JoonyaSI 26-May-2006 11:29 AM


Originally posted by Cynikal.Mindset
shifter bushings, replace them
thats exactly what i was thinkin it was .. cause it used to do it a lil but its progressivly getting worse .. my shifter is also very loose ... it like wobbles all over the place .. im almost certain its bushings .. and yes its a stock shifter ...

my car is 100% stock ... cept for the SRI

Cynikal.Mindset 26-May-2006 11:36 AM

just get the kit from honda, its pretty cheap

imported_JoonyaSI 26-May-2006 11:42 AM


Originally posted by Cynikal.Mindset
just get the kit from honda, its pretty cheap
about how much we lookin at ? casue i would prefer to stay OEM for sure ..

Buddah 26-May-2006 11:50 AM

Shifter bushing kit for EK: part number > 06542-SH3-010

If you need one, let me know.

Brett 26-May-2006 11:52 AM

I had a similar grinding once and it ended up being a bearing inside the tranny.

Connie 26-May-2006 12:04 PM

its usually that, or my husband had something similiar and it was his release bearing.

imported_JoonyaSI 26-May-2006 12:04 PM


Originally posted by Brett
I had a similar grinding once and it ended up being a bearing inside the tranny.
ur prolly talkin about the release bearing .. that grinds a lil lil bit too but only when i idle its heard .. other than that its just something ive gotten used to ..



Shifter bushing kit for EK: part number > 06542-SH3-010

If you need one, let me kno

i would like to know the price tag on that item please and thanks ..

imported_Flyte 26-May-2006 01:02 PM

id say release bearing or even input shaft?

imported_Joe_98Si 26-May-2006 04:19 PM


Originally posted by JoonyaSI


my shifter is also very loose ... it like wobbles all over the place .. im almost certain its bushings

Shifter bushings!
if your shifter wobbles all around even when its in gear then yes your going to have to replace the bushings

89SIHATCH? 26-May-2006 05:41 PM

the wobbles are caused from the shifter bushings. but the grinding is not from that. mine are shot and i dont have a grinding noise.


is it more a rattle than a grind? can you leave it parked, then rev it and hear it?? or just driving in those certain gears (3-4)

most likely the tranny. check the fluid, or better yet flush it out and top her up.

chris_si98 26-May-2006 05:53 PM


Originally posted by Joe_98Si


Shifter bushings!
if your shifter wobbles all around even when its in gear then yes your going to have to replace the bushings


you've been listening while i rip on scotts car eh? lol

imported_Joe_98Si 26-May-2006 05:56 PM

lol scotts car is a prime example i always rip on him for that lol


All times are GMT -4. The time now is 09:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands