imported_Euro_EF

what is everyone running? mine stock is 40 psi. i wanna go more but dont know what would be good. i got a b16a p28 chipped,type r cams, intake and exahust


any help would be awesome.

thanks

zeeman

iTrader: (1)

leave it stock.
I would get it tuned, you've already got a chipped p28, so get someone to make you a custom program (pm me for more info).

imported_ontariorider

on my b16 its at 40-45psi

chris_si98

leave your fpr stock, running more fuel will just make you run rich and make you loose power. Like zeeman said you need to get it tuned if you want a few more ponies

zeeman

iTrader: (1)

well i always say tuning is a necessity when you change the cams, up the compression or add a turbo/supercharger. And since he's changed his cams, i'd say tuning is a must. Tuning will really get the most out of those type R cams.

1sykcoupe

whats the difference between chipped n not chipped. can us till run a b16 if its not chipped

zeeman

iTrader: (1)

well if its chipped you can put a program on it to run basically any engine. If its not, it (the p28) really only has the proper fuel/ignition maps to run a d16z6. I mean, it will run a b16, but not as well as it should/could with the proper fuel/ignition maps.

ELGUY

Chip it, if you want to play with the fuel. Listen to Zeeman. I messed with my fuel pressure and fouled a nice new set of plugs. I had him send me a custom chip, and the car is much happier.