imported_LiL Devil

I just put the engine in and everything looks good but I need help doing the wiring.

I know that the B16a2 is an OBD1 and my has an OBD2 so I will need an OBD1 to OBD2 Harness

Question 1.) Where can I get the harness in the GTA ares?

Question 2.) What do i need to do to the wiring? The engine I got comes with the ECU.

It'll be really nice if someone can get me a step by step write up. I've search already by it seems everyone are having trouble doing the wiring.

trigga

if u can afford it, keep obd1 just incase u want to get a good tune in the furture.

imported_LiL Devil

So I am guessing after i get the Harness It's plug & play? Going to tune with Hondata so OBD2 will not be a problem.

imported_Team Rukus

b16a2 is obd2 not obd1
your car right now is obd1 if its a 93 civic
turning it to obd1 is better cuz its easier to tune and you dont need 2 o2 sensors.
the easiest way is to get a conversion harness and use that the harder way is to switch injectors, distributor etc...

imported_LiL Devil

Awsome, I got a new EK so if the obd2 is OBD2 and my car is also OBD2 what do I need to to regards to wiring? Plug and PLay?

imported_Team Rukus

dont need to do anything except add wires for the vtec and extend a couple of wires to reach the sensors if your using the stock harness everything else is plug and play. if your using the b16a2 harness then its all plug and play.

imported_Team Rukus

btw is your car 96-98? or 99-00? cuz that matters aswell because of the obd2a and obd2b

imported_LiL Devil

So if i get an B16A1 which is an OBD1 then what do I need to do with the wiring? Do I just use the ECU comes with the engine? what about the wiring?

imported_Team Rukus

what do u mean b16a1? i thought u already installed the motor?

imported_starboy869

???????????????????????????

VTEC_Thunder

Little confused here...

1st you say you have installed a b16a2, which is obd2, now your asking about a b16a1.....

Which do you have?

imported_LiL Devil

Opps sorry guys ... My engine is OBD2 that's what I am trying to find out. Thx team Reku so all I have to do now is wire the vtec and extend the wires.. thanks ppl... great help.. got my engine started with no codes = )

iwanna93sihatch

you sound like a bull****er man no offense but stating u have a b16a2 then asking what you need to do for a b16a? sound like a dreamer buddy