blitz_ctr

ok as the title states, i have a 89 civic dx which is going to be my latest/first project, and im wondering how much work it takes to put teg brakes on? ive got an entire donor car( 90 gs, or i can pull them off my 92 rs), but what all is needed from the car? any help would be appreciated...thanks

Brett

I suggest using the search function. This topic has been covered many times.

CIVIC_DX-R

been looking everywhere for help but cant find any
i got 2001 Gsr full susp/brakes i know this isnt a straight swap but can be modded with other honda parts(90-93 integra) what do i need for the swap?? or if someones got 90-93 susp brakes n wanna swap let me know plz n thanx

CIVIC_DX-R

its for a 90 ef

91Civic_Joe

I would like to know how to hook up the lines from the rear brakes to the MC? U have to run the rubber lines all the way from the rear to the MC?? and change the MC to an Integra MC so it had the inserts for the Rear brakes lines????

Please explain how it works?

bbarbulo

iTrader: (2)

90-91 civic EX sedan steering knuckles is what you need to start you off. you could use the integra ones, but they are about 1" longer and will throw off the geometry of the front susp a lil bit. otherwise how much work will depend on how handy you are, how many tools you have, and how rusted your car is.

turbo___zc1

you need 90-93 integra e brake cables you need the brake proportioning valve and the rear rubber brake hose that goes from the capiler to the hard brake line thats it.

CIVIC_DX-R

thats all i need i dont need any susp parts???
n thanxs alot for all that

CIVIC_DX-R

come on i want the susp on my car someone plz help me i was told i need lower control arms i think from a 90-93 teg. my susp came off a bubble back would that chance anything ????? maybe making it an easier swap into my ef? n any quotes on an install??
thanxs

imported_1PhatCX

u dont need to change the control arms
just unbolt the drum hubs, and bolt on the disc hub