Ecu question
#1
Ecu question
i am getting a ecu pm7 and would like to know how i can tell if it comes off a 5 speed ???
I have a 5 speed and don't want the one from the auto..
Or should i go with the pg7???
Thanks alot
Zexhuffer
I have a 5 speed and don't want the one from the auto..
Or should i go with the pg7???
Thanks alot
Zexhuffer
#4
why not just go with a 90-1 PM6 and/or PR4 and get it chipped. you can run the stock PM7 program to say the least and many more.
auto ecus are designated as followes:
37820-PM7-J51 (look at the last three digits) or A51, J50, J52 or 900, 901, 902
auto ecus are designated as followes:
37820-PM7-J51 (look at the last three digits) or A51, J50, J52 or 900, 901, 902
#6
I have a 88 civic with a zc swap and was wondering what would be the best ecu for it..
pm7
pg7
i have a pm6 in it right now but have got it plated yet so don't know how well it runs.
What would be the difference between the 3 and why?
Thanks if you can help me.
Zexhuffer
pm7
pg7
i have a pm6 in it right now but have got it plated yet so don't know how well it runs.
What would be the difference between the 3 and why?
Thanks if you can help me.
Zexhuffer
#7
clutch for a friend eh.......you woudl have to open it up...zc ecu's are hard to find but would be best...or get a si ecu an chip it for the zc......zc can run an ecu from a 88-89 teg and 90-91 si...I fuckgin forget all the ecu codes I use to care now I dont'.....
Thread
Thread Starter
Forum
Replies
Last Post