EL_CIVIC

hey turbo users,

i have a question..

i'm gonna run an safc/ injector setup for my turbo kit...

however..i am unsure of how to use the dsm injectors.. i know i can use the rc 440 cc's, but they are bit too much, i've heard that you can use dsm 450cc injectors.. anyone here have experience with it?

sugarcane

DSM 450cc injectors w/ resistor pack wiring.

bbarbulo

iTrader: (2)

It needs modding... need a resistor pack as well. PROBLEM WITH THIS.... AND READ THIS CAREFULLY: the cars that came with the 450cc injectors are OLD! Injectors are a wear item, and when you are boosting, you don't need injector failure.... nor can you afford to have it happen. $500 for a set of injectors is cheap insurance versus what could happen w. shitty injectors. They work fine, and are relatively cheap, but you have no clue as to what you're getting. And I already found out WRX injectors at 420ccs don't fit in our rail You can find used ones on honda-tech and dseries.org

sugarcane

Heh I would hope the DSM 450's hes planning to put in are in good shape

bbarbulo

iTrader: (2)

They only came on the 2nd gens, which makes them friggin OLD! Seals may have started to crack and leak, and GOD knows if they were abused under extended pulsewidths and fuel pressures in triple digits... those DSM tuners thing it's all about the 16G.... they do little to properly increase fuel delivery too.