distributor help
#2
well take the cap, rotor and cover off. Remove the screws that hold the + (black/yellow) and - (white/blue) terminals from the distributor one is a round connector and the other is square.
Check the resistance between the primary pos/neg terminals, should be 0.6ohm to 0.8ohm.
Then check the resistance of the secondary winding terminal and + primary terminal (black/yellow) it should be 12.8 to 19.8K ohms.
Make sure the ignition switch is OFF when doing this.
Check the resistance between the primary pos/neg terminals, should be 0.6ohm to 0.8ohm.
Then check the resistance of the secondary winding terminal and + primary terminal (black/yellow) it should be 12.8 to 19.8K ohms.
Make sure the ignition switch is OFF when doing this.
Thread
Thread Starter
Forum
Replies
Last Post
civicnation
Honda Civic Performance - JDM Discussion
6
13-Oct-2005 10:12 PM
civic_integra
Interior - Audio - Security
11
01-Aug-2005 12:53 PM
bustedB18
Honda Civic Performance - JDM Discussion
6
20-Oct-2004 10:21 AM