disk conversion
 

just picked up a DC GSR disk brake

now my question is.....will the front shocks and the forks from my EG fit the GSR's brake?

any useful website with pic shows how to do the conversion?

thx

GSR brakes are the same as regular Integra brakes. If your just changing the knuckle/spindle you should have no need to worry about the front shocks and forks from your EG, use the stock ones.

So in order to change the brakes by using the entire DC knuckle/spindle(sorry I don't have pics) you need to unbolt and separate A)the upper ball joint, B)lower ball joint, C)tie rod end and D)brake line. One thing to note though, if you are using the integra front brakes you will also need to use the integra front brake lines as the EG lines are too short to reach the calipers.

Best of luck.