d16z6 swap questions
#1
d16z6 swap questions
I'm dropping a d16z6 into my 90 crx si and plan on using the stock ecu and harness. Now will the fields boxer vtec controller work to engage vtec for my obd0 ecu? Also will my a6 flywheel/clutch bolt up to the z6 motor. My clutch and flywheel are only a month old and would hate to see them not used. And last is there a big difference between an a6 vs. z6 tranny. I have both and would like to know which would benefit me more. Thanks.
#3
The motor will be a little shimmed, make sure the crx is manual (5spd) and you retain all your existing mounts..
the a6 (si) tranny will bolt up to the z6 motor as well as the flywheel&clutch..
PROBLEM AREA : is the distributor..you will have to drill out the legs of the stock SI (d16a6) distributor to fit the z6 head, or make some sort of adapter plate, or convert to obd-1 and use the z6 distributor and ecu..
RED90DX
the a6 (si) tranny will bolt up to the z6 motor as well as the flywheel&clutch..
PROBLEM AREA : is the distributor..you will have to drill out the legs of the stock SI (d16a6) distributor to fit the z6 head, or make some sort of adapter plate, or convert to obd-1 and use the z6 distributor and ecu..
RED90DX
Thread
Thread Starter
Forum
Replies
Last Post
CivicOnBlades
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
24-Mar-2010 05:02 PM
Dyzee
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
13-May-2004 07:43 AM