spracingsports

anyone got anything to say about the b21a1......i figured it was a little better than the b20, cuz is has more displacement

bbarbulo

iTrader: (2)

LOL.... helllllll no

I wouldn't pay to have that swapped in, that's fo sho

punkindrublic

it would be an improvement over a stock d series non vtec... but thats about all....

1niceSi

I've never even heard of a b21 before.

imported_nautica_t

B_JAI

B20 is good B21 don't know.. but you can be the first one and test it out..

imported_loudsubz

B21A1
.
Displacement (cc): 2056
Power (bhp@rpm): 140@5800
Torque (ft/lbs@rpm): 135@5000
Compression Ratio: 9.4:1
Bore (mm): 83
Stroke (mm): 95
Cam Design: dohc
VTEC?: no
OBD: 0
Year(s) Produced: 1990-1991
In the following car(s): Honda Prelude Si

spracingsports

ya.... US version rated at 145 hp..... comes in some accords and older preludes...ok..... i just read about about a guy doin a vtec head swap on one... and the bolts are like a half an inch apart fron the block to the b18 head.... thought it was gonna be cool

1niceSi

This is my rule of thumb......don't put an engine in your car that is older in than your vehicle.

spracingsports

i wasnt gonna get one or nuthin..... i just never heard of it before i readthat article.... i was wonderin if it was any good... thats all

imported_gatherer

it's not a tue B series engine .. the motor mounts are not in the same spot ... and all normal b series engines have the same location for motor mounts

punkindrublic

it would still be fun

imported_gatherer

not really if honda ever made a mistake that engine was it

shlammed

that's not your rule of thumb...that's the law

imported_gatherer

only in certain states as far as I know .....

(I could be wrong ..... )

shlammed

I'm pretty sure it's the law in ontario