B18c1 engine swap
05-Sep-2006, 10:15 PM
#7
Registered User
Join Date: Apr 2006
Location: Baalllinnn
Posts: 912
ya buying your motor from a reputable place is key...some will say oh this motor only has 30k on it which could be the truth but mostly likely a lie
even if a motor has alot of kms it doesnt matter just make sure you get the seller to do a compression test on the motor infront of you, if all the numbers are good arcross the board and the visual inspection is good then giv'er and enjoy
even if a motor has alot of kms it doesnt matter just make sure you get the seller to do a compression test on the motor infront of you, if all the numbers are good arcross the board and the visual inspection is good then giv'er and enjoy
05-Sep-2006, 10:27 PM
#8
Senior Member
Join Date: Mar 2005
Posts: 6,176
theres only one place in the GTA where you should get your motor from. And I think we all know where that one place is.
but you'll need a full swap.. axles, linkage (includes stab. bar), axles, halfshaft, starter, alternator, rear tranny bracket, torque mounts, drive side engine side bracket, chip the ecu with (whatever motor you get) basemap and your set. There are a few other things you'll need, rad hoses, might need a new fuel line from your filter to your rail, throttle cable bracket (if you dont want to play around with it yourself) blah blah blah
but you'll need a full swap.. axles, linkage (includes stab. bar), axles, halfshaft, starter, alternator, rear tranny bracket, torque mounts, drive side engine side bracket, chip the ecu with (whatever motor you get) basemap and your set. There are a few other things you'll need, rad hoses, might need a new fuel line from your filter to your rail, throttle cable bracket (if you dont want to play around with it yourself) blah blah blah
05-Sep-2006, 11:31 PM
#10
Guest
Posts: n/a
Originally posted by chris_si98
theres only one place in the GTA where you should get your motor from. And I think we all know where that one place is.
but you'll need a full swap.. axles, linkage (includes stab. bar), axles, halfshaft, starter, alternator, rear tranny bracket, torque mounts, drive side engine side bracket, chip the ecu with (whatever motor you get) basemap and your set. There are a few other things you'll need, rad hoses, might need a new fuel line from your filter to your rail, throttle cable bracket (if you dont want to play around with it yourself) blah blah blah
theres only one place in the GTA where you should get your motor from. And I think we all know where that one place is.
but you'll need a full swap.. axles, linkage (includes stab. bar), axles, halfshaft, starter, alternator, rear tranny bracket, torque mounts, drive side engine side bracket, chip the ecu with (whatever motor you get) basemap and your set. There are a few other things you'll need, rad hoses, might need a new fuel line from your filter to your rail, throttle cable bracket (if you dont want to play around with it yourself) blah blah blah
06-Sep-2006, 12:12 PM
#12
Registered User
Join Date: Jan 2003
Location: Mississauga,Ontario
Posts: 1,386
i can swap the motor for u for $500 +motor ...i can get u a motor but i don't know the price because i pick up motors with other shops so we get them cheaper becuase we pick 4-7 motors at a time
06-Sep-2006, 05:53 PM
#13
Originally posted by goose****
i can swap the motor for u for $500 +motor ...i can get u a motor but i don't know the price because i pick up motors with other shops so we get them cheaper becuase we pick 4-7 motors at a time
i can swap the motor for u for $500 +motor ...i can get u a motor but i don't know the price because i pick up motors with other shops so we get them cheaper becuase we pick 4-7 motors at a time
07-Sep-2006, 08:47 PM
#16
Registered User
Thread Starter
Join Date: Sep 2006
Posts: 4
when i said change everything inside i ment a full swap.. axles, linkage (includes stab. bar), axles, halfshaft, starter, alternator, rear tranny bracket, torque mounts, drive side engine side bracket, ecu chip..........etc
