92JDMx

hey here is the problem i came up with during my swap

I have a EG which did not come with vtec...
i recently swapped in a B18C but used the exisiting wiring harness which was on the engine.. so what i m stuck with his i dont know how to wire vtec now since i used a vtec wiring harness... if i used my non-vtec wiring harness i would have been okay but didnt realize that till after the swap...

Any suggestion or help with this?

scarlemthug

i believe u just need to run 1 wire from the ecu to the vtec solenoid? also you may need to wire up the IAB's?

92JDMx

okay i found out that since i have 92 Civic, it has come pre-wired with vtec.. so all i have to connect now is my IAB and KS sensor... thanks for your help thou!