imported_SIR_Injected

Zeeman maybe you can help!
the one its obviously to big looks like i need a shorter one i think they gave me one for a 2000 SIR or 94-up integra . lemmie know or anyone thanks
-Rob-

zeeman

iTrader: (1)

you need one from a 95 DOHC VTEC del sol. I had this problem once myself. Just take the old belt with you so you can compare.

imported_SIR_Injected

i dont have a old belt
just the wrong one the gave me!

imported_SIR_Injected

i got another prob

when finished my swap the first time im using 94+ integra Axles and Inter shaft.. they said to use 94+ seals then cuz the 90-93 itegra seals arnt good enough for them newer axle's i droped in my gear oil i got a huge leak on the Inter shaft side (LEFT) i didnt notice anything b4 hand till the 2nd time around.. am i doin the right thing ? or maybe i ****ed the new seal i had in ??

-Rob

zeeman

iTrader: (1)

is the half shaft in the tranny all of the way? Pull it out and check the seal, it might be pushed in too far.

imported_SIR_Injected

i had a problem putting it in it would only go half way without the bolt holes lining up. i got them to line up after so im assuming its in all the way ?? ... ill look at it later on tonight and re-post ..