(88-91 b16a1 swap) says to use 90-93 axles.. but i have 94+ axles can this be done ??
as the topoic says?
|
94+ axles will work if you have a 94+ intermediate shaft. If your transmission is a 90-93, you need the 94+ axle seals.
90-93 axles will work if you have a 90-93 intermediate shaft. If your transmission is a 94+, you need the 90-93 axle seals. If you dont have the right seals, you'll have tranny fluid leaking all over the place. |
you need 90 integra axles the 94's havent got long enough splines on the intermediate side and the axle will in effect be too long.
|
okay so it works then it doesnt ??
the guy who sold em to me Mitoi Auto Parts said it works! i have the Intermediate shaft with my 94 axles |
Take em back. Teknotik sell's yonaka shaft's for B16 swap and there under $300 after tax. I bought them for my B16. A little piece of mind since ive seen a few stock axle's mudered on car's with just bolt on's.
|
Originally posted by dubz01si okay so it works then it doesnt ?? the guy who sold em to me Mitoi Auto Parts said it works! i have the Intermediate shaft with my 94 axles |
i have 94 axles and 94+ intermediate shaft
|
10-18-2003, 12:10 AM #4
John Administrator Car: 03 Evo/400hp s14 magazine queen My TRGarage Join Date: Jun 2000 Location: at the bar Posts: 26,340 you can use any Integra axles 90-01. For 90-93 axles, use matching era intermediate shaft, 94+ use 94+ intermediate shaft. If the axles are ABS, remove the ring on the hub side. __________________ There is no you, there is only me True rockstar party guy crew #002 This is what i wanted to know! :D |
All times are GMT -4. The time now is 04:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands