bulldog138

My km guage on the cluster sometimes works when im at high speeds or will suddenly work if i have been driving for a while. But most of the time the needle jumps up and down and give me a reading that is obviously not right. once and a while i would hear eleterical noises comming form the cluster. what could be the problem? Do i need to replace the cluster or the cable?

thanks for the help

MPR

I'd try popping the cluster out of the dash and check all the connections in behind to make sure nothing has come loose.

Or you could also check the speed sensor.

bulldog138

i had took the cluster out and cleaned all the terminals.. but still nothing.. i was told that sometimes the bearings on the speedo cable cable need to be lubricated?

kwikb16a2

LOL

kwikb16a2

you have a vehicle speed sensor in the top of the tranny which sends a signal back....so its either your VSS or the cluster

bulldog138

thankz i will look into that... does it refer to eg's?

kwikb16a2

i knows thats for EKs for sure, but pretty positive it applies to EGs

Midori

I had one like that.. I thnk it happens to a lot of eg clusters... I suggest replacing it with a Si cluster if you don t already have one.

kickz

iTrader: (1)

cluster or the connection .. on the speed sensor

bulldog138

but i noticed that a few times some lights on the cluster would blow out and come back on... i have a strong feeling its the cluster itself... but i dont want to buy the cluster when the problem is something else.

loco_rides

iTrader: (2)

dude it's the cluster for sure go grab one off some one on here $100 at most and you'll have an rpm gauge also it's all plug and play no mods takes like 10 minute. Shoot me a pm if ya need help.

bulldog138

ill cheack it out still .... thanks for the help

k_r_a_c_k_e_r

iTrader: (3)

sounds like your cluster for sure.

I have a CX cluster forsale if your looking for one.

PM if your interested.