retro fitting headlight
#1
retro fitting headlight
i'm thinking of retro fitting a TL-S Bi-Xenon HID D2S Projectors.would the high beam works? i have an em2 and the headlight plug coming out from my car on have one cos low/high mean are different bulb.
i'm sick of my TYC headlight really shitty output..i wasted my EXTREEM HID.it's either i have high or low beam but i want both..
i'm sick of my TYC headlight really shitty output..i wasted my EXTREEM HID.it's either i have high or low beam but i want both..
#2
You didn't mention what Civic you drive.. this info is for a Ek/96 to 00 civic
Yes and No.. if you attach it to the the stock harness the high beam will not work BUT if you have the TL wire harness YES IT WILL. Also if u run the projector on the stock harness you can get what they call a toggle switch to turn on the high beam. So you need a TL harness or a toggle switch to make it work peace..
Ps If your going to use your stock headlight the TL projector will be too big and you will have to cut a hole in your housing to fit perfect use tsx it's smaller don't make the same mistake i did.
Yes and No.. if you attach it to the the stock harness the high beam will not work BUT if you have the TL wire harness YES IT WILL. Also if u run the projector on the stock harness you can get what they call a toggle switch to turn on the high beam. So you need a TL harness or a toggle switch to make it work peace..
Ps If your going to use your stock headlight the TL projector will be too big and you will have to cut a hole in your housing to fit perfect use tsx it's smaller don't make the same mistake i did.
Thread
Thread Starter
Forum
Replies
Last Post
imported_Pyro
Custom Honda Civic Exterior - Lighting
7
03-Jan-2007 04:23 AM
EG6_SiRII
Honda Civic Performance - JDM Discussion
3
12-Jul-2002 01:23 PM