lost the wheel lock..........please help
#1
lost the wheel lock..........please help
i have a set of the rims which i want to remove from the car, but i don't have the wheel lock key
i don't want to bring it to the shop as the car is not in running condition
any tool i can use to remove the wheel lock by myself? is that hard?
help help me out, i need to remove the rims asap
thanks
i don't want to bring it to the shop as the car is not in running condition
any tool i can use to remove the wheel lock by myself? is that hard?
help help me out, i need to remove the rims asap
thanks
#3
factory lock lugs? if they are honda should have a lock set kit and could remove em for free. if not have seen people hammer sockets over them and crack em loose with a socket wrench and pry bar.
worth a shot.
worth a shot.
#4
Car is not mobile, looks like you need to do this:
Get 4 1/2" sockets (17mm, 19mm, whatever fits ONE SIZE SMALLER), place it on centre and hammer the socket in, and deep.
Use a breaker bar, and in one swift motion, apply torque and loosen it.
If you can get the lock out of the socket, you just saved yourself a new socket (and you can return it). Repeat it 4 times, and never lose another lock key again.
Get 4 1/2" sockets (17mm, 19mm, whatever fits ONE SIZE SMALLER), place it on centre and hammer the socket in, and deep.
Use a breaker bar, and in one swift motion, apply torque and loosen it.
If you can get the lock out of the socket, you just saved yourself a new socket (and you can return it). Repeat it 4 times, and never lose another lock key again.
#5
I think everyone in their day has lost theres....I know I have...
I just went to CT, bought a set of mcguards, put the new locknut key over my locknut, turned it untill I heard a LITTLE tiny click, then got a hammer, and hammered that fcuked in there. I did this 4 times untill all of them were off.
I had one locknut so tight inside of the key, that I had to heat it up and hammer the **** outta the key to get the locknut out. After I was done, I simply returned the damaged goods back to CT for a full refund. They didn't look at the bent to **** locknut key tho
I just went to CT, bought a set of mcguards, put the new locknut key over my locknut, turned it untill I heard a LITTLE tiny click, then got a hammer, and hammered that fcuked in there. I did this 4 times untill all of them were off.
I had one locknut so tight inside of the key, that I had to heat it up and hammer the **** outta the key to get the locknut out. After I was done, I simply returned the damaged goods back to CT for a full refund. They didn't look at the bent to **** locknut key tho
Thread
Thread Starter
Forum
Replies
Last Post
gridlocke13
Brakes - Wheels - Tires
7
16-Dec-2007 12:02 AM
civic_integra
Interior - Audio - Security
11
01-Aug-2005 12:53 PM