DIY..changing front fender 99-00 civic
#1
DIY..changing front fender 99-00 civic
hi
are the 99-00 front driver and passenger side fenders the ssame form a coupe hatch and sedan?
how do i take off and replace the fender ..drivers side..?
do the bolts need to be torqued to a certain amount?
how do i remove the moulding piece that is on the fender?
also was there more than one VSM color code for the 99-00 civics?
thanks
are the 99-00 front driver and passenger side fenders the ssame form a coupe hatch and sedan?
how do i take off and replace the fender ..drivers side..?
do the bolts need to be torqued to a certain amount?
how do i remove the moulding piece that is on the fender?
also was there more than one VSM color code for the 99-00 civics?
thanks
Last edited by Joker; 24-Jan-2008 at 05:46 PM.
#2
i dont know if they are the same but
i believe to get off the fenders should be fairly easy, pop hood, ull see a couple of bolts under the hood, right along the fender that attaches to the chassy. remove them i think there is like 1 bolt in the door jam or around the bottom of the car or inner splash guard and i think thats it.
to remove the moulding scre driver it off i think theres a clip ull need to bust off to get it off or take the fender off and access it from behind unless it is double sided taped on but i dont think they are.
i believe to get off the fenders should be fairly easy, pop hood, ull see a couple of bolts under the hood, right along the fender that attaches to the chassy. remove them i think there is like 1 bolt in the door jam or around the bottom of the car or inner splash guard and i think thats it.
to remove the moulding scre driver it off i think theres a clip ull need to bust off to get it off or take the fender off and access it from behind unless it is double sided taped on but i dont think they are.
#5
simple to do.
open hood
take off 3 bolts on the top
open door
take off one bolt on the top in between the door and jam
take off the side skirts
take off the two bolts at the bottom
then its a matter of taking off the clips on the inner fender liner.
as for the moulding its very easy.
take a needle nose plier and squeeze the moulding clip in the back while pushing out.
open hood
take off 3 bolts on the top
open door
take off one bolt on the top in between the door and jam
take off the side skirts
take off the two bolts at the bottom
then its a matter of taking off the clips on the inner fender liner.
as for the moulding its very easy.
take a needle nose plier and squeeze the moulding clip in the back while pushing out.
Thread
Thread Starter
Forum
Replies
Last Post
1999blksi
Civic DIY Tutorials - Info
38
15-May-2010 05:56 PM
blak_lude
Custom Honda Civic Exterior - Lighting
1
27-Apr-2010 12:33 AM
imported_BoOsTd
Custom Honda Civic Exterior - Lighting
0
30-Apr-2004 11:15 AM