Sea Foam - Where to Buy
 

Just incase you were not aware.

We can now by this wonderful product (Sea Foam) in BRAMPTON!!!! YAYAYAYA.....

NAPA Auto Parts, where the old Home Hard Ware used to be, I was just there on Thursday and apparently they've had it for a month now.

ALSO!!!

If you NAPA does not have any or does not know what you're talking about, ask them to check with their warehouse as every NAPA can order Sea Foam and get it in stock :D

Hope this helps out a few people.

wut the hell is sea foam??

Check the thread on the main DIY page.

Carquest also carries it.

Every Carquest?
Or just some?

Is this some kind of car shampoo?

For your engine... search for the DIY Post.. explains everything.

Albatross on Melanie has carried seaform for over a year now.

Melanie Drive in Brampton?
@ Steeles?

Clubel.ca ended up having a seafoam meet at 403/dundas this past wednesday(26th). Turn out was great, plus my car feels like a million bucks when I drive it after that clean out. Also, my mind is at peace, knowing i got great cmpression test results. :notify:

Ok well, enjoy:

It started off with Mike doing a compression test on my motor. Results were as follows - cylinders 1-4: 210/210/205/210
Stupid cylinder 3!!!
http://img.photobucket.com/albums/v2...2/IMG_5089.jpg

http://img.photobucket.com/albums/v2...2/IMG_5090.jpg

Moving on, we moves to a more well lit area, so we can take pics and give people air to breathe...

At first, out hose was a bit too long, but found it funny, so we took some pics. People at the point from all over the lot were starting at us wondering what the hell is going on?

http://img.photobucket.com/albums/v2...2/IMG_5091.jpg

http://img.photobucket.com/albums/v2...2/IMG_5092.jpg

http://img.photobucket.com/albums/v2...2/IMG_5094.jpg
Jason, Mike, Dan

Then Jason brought some snipers and we cut them hoes...*ahem*...hose :p

http://img.photobucket.com/albums/v2...2/IMG_5095.jpg

http://img.photobucket.com/albums/v2...2/IMG_5096.jpg

Dan, using the stock air box as a bong and lighting up some **** in my stock air box. Pretty effective method...gets you really messed up. Not suggested for doing it at home tho :notify:

http://img.photobucket.com/albums/v2...2/IMG_5097.jpg
The ugly stock D motor

Then we got ready to pour, and started to pour away :D

http://img.photobucket.com/albums/v2...2/IMG_5100.jpg

http://img.photobucket.com/albums/v2...2/IMG_5101.jpg

Jason pulled on the throttle so that the car wouldn't die, and I ran off and took some pics.

http://img.photobucket.com/albums/v2...2/IMG_5102.jpg


Now, the fun begins!!!

Here comes the greatest pic of all:

http://img.photobucket.com/albums/v2...2/IMG_5104.jpg

http://img.photobucket.com/albums/v2...2/IMG_5105.jpg

Let's use the D16 Intake manifold as a bong next time :p We'll get the whole parking lot high instantly :p
http://img.photobucket.com/albums/v2...2/IMG_5106.jpg

Then we let the car rest for 5 minutes
http://img.photobucket.com/albums/v2...2/IMG_5107.jpg

Then we let her rip again
http://img.photobucket.com/albums/v2...2/IMG_5110.jpg

No one took pics of this, but I ended up driving around the entire parking lot creating a mess...man was it smokey!

Then Mike moved on and did his car:
http://img.photobucket.com/albums/v2...2/IMG_5113.jpg