2000Sir

Hey guys,

Anyone know how to wire aftermarket injector to a resistor box. when it comes to wires and electronics I get really If'y, I recently had all the wiring re-done in my 2000 Sir because a shop had hacked it all. I've been told its simple but i rather know exactly what i need to do before I start cutting wires.

Thanks Mike

SloHatch.95

I will try and help you out here. I just did mine in my car. There is a dead end connector box on your driver side strut tower. Find the wires that go the the injectors. there are 4 of them, obviously. You do this by using a multimeter. On the resistor box you will have 5 wires, 4 black and one red. What to do now right? Cut the wires that are going to this dead end clip that are for the injectors, make sure to leave extra wire. Take the wires coming FROM the injectors and connect each wire to a black one, That will leave you with just the red one left over, what now? ALL the wires going into the dead end clip; wire them upto the one red wire. And you are done.

I am going to try and find a writeup for you, better than my words. DSMtalk.com has it and so does turbod16.com