DIY: Wheel centre caps
I recently purchased a set of 16" RSX wheels for the winter and I didn't want to use the Acura caps or the Honda caps from my summer wheels.
I found this link http://www.honda-tech.com/zerothread/1543073 and used a suggestion from there. Great link too. It shows alot of different wheels and whay caps fit them. I purchased these from my local Lowes. http://img.photobucket.com/albums/v9...asSi/003-1.jpg http://img.photobucket.com/albums/v98/DumbasSi/002.jpg They are called Knockout Closure plugs. 2 in a package, found in the electrical supply area and they were about $2 for a package. They are 2" in diameter, which compared to the OEM caps, slightly smaller. They are metal (very shiny aluminum I think) and have small tabs on the backside similar to the OEM caps. I did a test fit on my summer wheels and for them to fit without falling out, the tabs needed to be bent out slightly. I scuffed the surface with some fine sand paper and painted them silver with VHT caliper paint. http://img.photobucket.com/albums/v9...asSi/004-1.jpg Finished product. http://img.photobucket.com/albums/v98/DumbasSi/007.jpg I had to adjust the tabs slightly, but they fit perfect and have yet to fall out. I think they look much better then no caps at all. |
what a steal, good and useful diy! so sim-pow!!
|
wow thats pretty awesome, ill remember that one!
|
Very nice!, I'm going to look into this for my missing caps.. hope they fit
|
This is going to be cheaper than getting a new Rota cap for sure.
|
They do come in different sizes ranging from .5" up to 2". You could also put a custom decal in the centre.
|
I got some last week for my missing ones.. look and fit great!
|
awesome diy one of the best ive seen in a while
|
how do you bend them i have sir rims and i used 2 inches but its ridiculously hard to put it in im going to go get 1.75 and see if theyre any better
|
where can i find these in GTA? tried canadiantire but could not find it
|
Originally Posted by gregory
(Post 1383089)
where can i find these in GTA? tried canadiantire but could not find it
|
what size you need ? I probably have them
|
He mentioned it in the 4th sentence, at Lowes. I know there is one on Caledonia rd.
|
kk i used 1.5 diameter and it fits pretty good it looks a bit tilted but its hard to see
|
these are also good for replacing missing horn buttons on racing steering wheels...granted you will have no horn and be illegal but it sure beats having a open hole there
http://photos-f.ak.fbcdn.net/photos-...85_6991238.jpg |
All times are GMT -4. The time now is 01:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands